 Rig
yer kite correctly ...
It was noticed at a recent Open Meeting
that a couple of boats had the kite halyard rigged the
wrong side of the cunningham line.
In the photo below you can see the yellow
halyard kinking over the red cunno line ... below is
wrong ....
 This
means that if the cunningham is not fully released when
you go to hoist the halyard will run over (well under
...) the cunningham line and there will be quite a bit
of friction in the system and the hoist will be slower
as a result (which is slow) plus you will make the lines
go all furry which is defiantly not pimped.
Read the
rigging guide; see step 43 ... Guide
here >>>
Verdict: PIMPED
See
other Pimps
Send
us your mods to feature in "Pimp My Skiff"
|
