Traveller / Mainsheet strop
Posted: Sun May 19, 2019 9:02 am
Can this have loop around block base to hold the block on the centre line, (as RS600)? Rule c.6.1.1 appears to say not because the rigging and arrangement change. Please can this be clarified?
C.6.1.1 The boat, spars, sails, hull appendages, racks, spinnaker sock, mast step,
spreaders, control lines, attachment points and means, blocks, mainsheet,
halyards, trapeze, traveller, vang, cunningham, traveller end retainers, traveller
block, gooseneck, vang lever, vang arms, rudder gantry, and rigging shall be
rigged, arranged and have the purchases as Originally Supplied and as shown
in the Rigging Manual save as otherwise allowed to be changed by these class
rules.
C.6.1.1 The boat, spars, sails, hull appendages, racks, spinnaker sock, mast step,
spreaders, control lines, attachment points and means, blocks, mainsheet,
halyards, trapeze, traveller, vang, cunningham, traveller end retainers, traveller
block, gooseneck, vang lever, vang arms, rudder gantry, and rigging shall be
rigged, arranged and have the purchases as Originally Supplied and as shown
in the Rigging Manual save as otherwise allowed to be changed by these class
rules.